- Pegasus2 R4 Promise Utility For Mac Rebuild Raid Download
- Pegasus2 R4 Promise Utility For Mac Rebuild Raid Kit
- Pegasus2 R4 Promise Utility For Mac Rebuild Raid Command
- Pegasus2 R4 Promise Utility For Mac Rebuild Raid Pack
- Pegasus2 R4 Promise Utility For Mac Rebuild Raid Pack
- I will update this review once I receive my new Mac Pro with a Thunderbolt 2 connection. (Using Blackmagicdesgin Disk Speed Test Ver 2.2. Averages based on 1gb and 5gb stress tests)-.Update Just received my Mac Pro Thunderbolt 2.-Mac Pro internal SSD speed of 975mb write/ 942mb read.-Promise Pegasus2 RAID 50 730mb write / 659mb read.
- My recent purchase of the Pegasus2 R4 disc-less drive has been a mixed experience. The drive is certainly well made and has worked correctly and quietly from the start. However, the utility software that is required to set up a Raid or otherwise monitor/modify the external drives has never functioned.
- PROMISE Technology is committed to providing high quality service and support to its customers. Our technical support is limited to PROMISE branded retail products. Different OEM manufacturers may have made unique modifications to the PROMISE hardware or software and they are responsible for supporting their products.
HI - I installed Sierra OS which did not recognized my Pegasus 2 R4 system. after many calls to Apple and then, some technical support with Promises they informed me that my #1 HD was failing and that I should replace it.
So, now I have purchased and installed the new HD into my Pegasus 2 R4 system, and have it plugged into my Mact with Seirra OS. The system needs to recognized the new HD and I do not know how to install the system so the RAID 5 is working without loosing the data on the other 3 HDs that are still working well in my system??
How to Rebuild a failed HDD in Disk Array. I am facing with the similar issue of not recognized Pegasus 2 R4 after a shut down through promise utility w ere you able to fix this problem. Since Promise technical team is asking me to get in touch with third party vendor even after my product is under warranty. Following is the reply from promise.
Can someone please give me step by step instructions to rebuild this new HD in the RAID 5?
I do not want to erase the other 3 HDs since they have my Data on them, and simply want the new HD to be recognized as part of the RAID 5 so, I can continue working as normal.
I was going to try follow the Wizard to set it up, but am afraid that I may do it incorrectly, and I also need to ensure that the HD are set up as 'Mac OS Extended (Journaled)'.
If you can please provide step by step instructions.
Thank you and appreciate your help!
I’m a Windows and a MAC User. It really chaps my knickers that I went out and bought a brand new Promise R4/R6 RAID Array only to find out I can’t use it with Bootcamp. (Having an SSD in my Macbook Pro is great, but space is at a premium).
Apple doesn’t want to help, nor does promise regarding getting it working on Bootcamp. Yes, you can kind-of use Parallels, but the reality is you’re going to get completely horrible speed. This really isn’t a solution anyways, because it just adds tons of overhead to a system.
So I decided I’d start noodling around and figure out the problem. So here are the known factors:
Thunderbolt will work with Thunderbolt devices on the MAC and sometimes on the PC (depending on the device).
The Pegasys R4/R6 WILL WORK on Bootcamp (with a bit of trickery), because Apple doesn’t want it to work with Bootcamp. Just another way to move Windows users over to MAC OSX completely, although there are some of us that need the R4/R6 and it’s bandwidth capabilities over Thunderbolt on Windows (me included).
A Thunderbolt device will work on Bootcamp as long as it’s connected during startup, but daisy-chaining (is that even a word!?!!) to the primary device will allow hot plug Thunderbolt devices to work on secondary+ devices (if supported by Bootcamp).
I’m a smart duckie (at least that’s what I’m told).
First things first.. The evaluation or the problem. Plugging a Pegasus into the Thunderbolt port and running apple updates (both apple and bootcamp side) gives us tons of updates (Mostly 2 EFI updates and the Thunderbolt drivers).
I booted up into bootcamp only to find out that device manager shows there’s a RAID controller made by Promise without the drivers. So I get to thinking.. What other RAID controllers out there use the same controller chip? PMC-Sierra’s PM8011. Well, seems like there are quite a few and after mucking around with all the big brand name drivers, none would install. Now obviously, this is a problem.
Knowing what I know from the Linux world, drivers detect chipsets and that’s basically it. So I figured I would do some hacking on my own. After 2 days of trial and error, I come across a press release stating that PMC and Promise are building controllers that use this exact chip! Woohoo! That was the first major step in the right direction.
I figured out that the SuperTrak models use the PM8011 and simply downloaded the windows drivers. You’d think it would be a straight-forward install right? Wrong. It didn’t work. So poking around in the inf files, I realize that the PCI vendor and device IDs are missing for the RAID controller.
I simply modified the .inf file in the drivers for the SuperTrak and added a line as follows under the [Promise.ntamd64] location and did a driver update from device manager and what do you know! It works!
%stexYosemiteDesc%=stex_Inst,PCIVEN_105A&DEV_8760
This is the RAID controller PCIVendor ID for Promise: 105A and the Device: 8760 the windows Bootcamp version of the Raid controller.
I saw the controller and the Array pop-up in my device manager and immediately went to Disk Manager to see if it appeared. Well, guess what? It does! Now, we’re not done.
You will need to boot into the MAC side of things and run the Pegasus R6 configuration utility to configure the array, but that’s not a big deal. I set mine to RAID-5.
Pegasus2 R4 Promise Utility For Mac Rebuild Raid Download
I decided I wanted to do something special and have access on both the MAC and Windows side, so I erased the disk and made it one big honkin HFS+ partition.
I went to Paragon Software and purchased HFS+ for windows + NTFS for mac and installed it. Just because I like access to all my files without rebooting into one OS or another. This is optional as you can partition all you want with the Disk Administrator in Windows.
Pegasus2 R4 Promise Utility For Mac Rebuild Raid Kit
Create Logical Drives, Format Them, do whatever you want. Next comes the speed test. Could I really achieve Thunderbolt like speeds from Bootcamp with my little hack? Only a test will tell. So I did the following:
Copied a 1.6GB RAR file from and to the array. Avg speed? 311 MB/s. Did this three times and to and from an SSD drive, I’d say It did pretty well. I’m running a 512 GB Crucial CT512M4SSD2CCA M4 2.5″ 512GB Solid State Drive rated at
| Sequential Access – Read: Up to 415 MB/s (SATA 6Gb/s) |
| Sequential Access – Write: Up to 260 MB/s (SATA 6Gb/s) |
All the extra crap I’ve been running in the background makes it come pretty damn close to the limits on not Thunderbolt, but the SSD. So I’d say I have some pretty good numbers. The true test though is to test whether or not I’m going to get true Thunderbolt numbers that are a little more scientific.
So I installed a 2GB RAMdrive using DATARAM RAMDISK free version and did some performance testing on the ramdisk using Performance Test 7.0 Evaluation version. Here are the results. Please keep in mind my machine was transferring data from my expresscard 3.0WD Mybook 2TB Drive to the Pegasys Array at the time, but still, the numbers are pretty impressive:
RamDisk: 2GB File 2GB Disk
Now I decided to transfer the same 1.6GB file from the RAMDISK to the R6 Array while doing the USB 3.0 Transfer from expresscard / 34 adapter moving at 97.4 MB. I was a little surprised when I pulled 1.09 GB/s coming from RAM to the Pegasys and on the way back, I was pulling around 900 MB/s.
So I’d have to say the Thunderbolt Hack was a success… Well, there’s one more test to complete, but I’ll have to get another SSD and stripe it in my macbook so I can truly see how this performs.
If you find this post important and extremely useful, please donate. Business has been slow and I have a family to support. While I don’t like recommending amounts to donate, I’d love to see some $25.00 or more donations due to the fact that things haven’t really been shaping up for me lately, but every dollar counts. Also, if you decide to buy something mentioned in this post, please use the links in this post, because I get a few pennies and right now, every penny counts.
Another way you could really help out is joining Childguard if you have an Android phone. It’s free, ad-free and would really help to kickstart a business that could potentially give me some stability.
Thank You Friends.
My next project will be to get the ATI RADEON stuff (APP / Stream) working on the Macbook Pro.
UPDATE: I was going to buy a second SSD to Stripe within the Macbook pro to test throughput (and because I wanted more space), but apparently, after doing some research, it turns out Apple Macbook Pros (Early 2011) have an issue with SATA III in the optical drive bay. They don’t function reliably at SATA III, but function at SATA II. Kind of a problem for a RAID-0 Stripe. One SATA III + ONE SATA II = DISASTER and lots of lost time and data. So, I ordered a 16GB RAM Kit to get myself some more performance. (and a larger RAM Drive) for testing to / from the R4/R6.
Pegasus2 R4 Promise Utility For Mac Rebuild Raid Command
After a few days of testing with the R6 on Windows 7, I realized that running HFS on it was NOT a good Idea. So I just reformatted the partition using Disk Manager as an NTFS partition and all is well. No data corruption, lightning fast speeds, and lots of safety for my data.
Pegasus2 R4 Promise Utility For Mac Rebuild Raid Pack
Note: This may sound kind of funny, but now that I’ve got the bandwidth to do some serious data transfer at extremely high speeds, I’m annoyed that my SSD is the bottleneck in the equation. A full 400 GB Bootcamp Partition via Acronis takes 56 minutes. (due to the compression overhead).
**UPDATE: So It’s been about a week or two since I’ve had my Promise R6 running in Bootcamp natively and I have to say it’s been very stable. I’ve maxed the RAM on the machine out to 16 GB and added a 4GB RAM Drive amongst other things. [see my other posts] I managed to eek out another ~15-20% in performance, but I’m still annoyed with the total speed of the whole machine. I was going to stripe a pair of SSDs until research revealed that the secondary SATA port isn’t stable at 6Gb/s. So that idea went out the window. I did, however, move my pagefile configuration around and put a minimal pagefile on the C drive while using the Promise and RAM Disk to help speed things up. I modified my browsers to use RAM instead of disk for caching. It’s definitely brought the machine up to a new level of peppiness.
If you’re really having problems and need a step by step tutorial with screenshots, I have written an ebook on this. Please don’t pirate this as I am trying to support my family and this blog hasn’t really brought in any income.
Pegasus2 R4 Promise Utility For Mac Rebuild Raid Pack
Step by Step Installation Instructions $10.00 [wp_eStore_buy_now:product_id:1:end]