Bloglearn544

USB-To-Ethernet Adaptors for Mac OS X

JIAPENG Network Technology JP1081 USB2.0 To Fast Ethernet Adapter - install the driver manually That's why we use cookies to improve our sites, to offer you information based on your usb lan card jp1081b and to post with. In order to make sure you are downloading the exact right driver the hardware id is USB/VID 0FE6&PID 9700. PC with One USB 2.0 Port Driver Support for MS Windows 98SE / Me / 2000 / XP / CE4.2 / CE5.0, Linux, Mac OSPackage Content USB 2.0 Ethernet Dongle User Manual. Software CD Driver x 1Standard packing100 PCS / CARTONPackage InfoDimension: L 7 x W 5 x H 1.5 inch Weight: 0.2 lb USB 2.0 Ethernet Adapter 10.

Introduction

Like many Macintosh users, I've wanted to add a second Ethernet to an iBook (iMac, or Mac Mini) to use as a server (or as a replacement for a dead Ethernet built-in). Although USB to Ethernet adaptors are cheap and plentiful, Mac OS X drivers are not. After scouring the web and talking to other Mac developers, I finally found a workable combination. The purpose of this note is to document what works since I haven't seen it widely published anywhere else. I welcome your feedback to help keep this page up-to-date.

Jp1081b Driver For Mac Computer

OEM Alternative (Gigabit Ethernet but limited by USB 2.0)

Device: http://www.amazon.com/Plugable-Gigabit-Ethernet-Network-Adapter/dp/B003VSTDFG
Driver: http://www.asix.com.tw/FrootAttach/driver/AX88178_Macintosh_10.4_to_10.7_Driver_v3.6.0_20111014.zip

Drivers and Supported Devices

After some research on the web, I came to realize there are two basic catagories of USB-To-Ethernet adaptors:

1. USB 1.1 devices that use a Pegasus driver.
2. USB 2.0 devices that use a AX8817x driver
   (or its successor, the AX88772 which appeared around Aug-2005).

While there are no doubt exceptions, most of the popular low cost adaptors fall into one of these categories.

USB Network Adaptor			Driver
Brand	Model	USB	Pegasus	AX8817X
3COM	3C460B	1.1	x
Apple	USB Etherenet	2.0
Belkin	F5D5050	1.1	x
D-Link	DSB-650	1.1	x
D-Link	DSB-650TX	1.1	x
D-Link	DUB-E100	2.0	x
D-Link	DUN-E100	2.0	x
Farallon	Netline PN796-650	1.1	x
Kingston	KNU101TX	1.1	x
LinkSys	USB10TX	1.1	x
LinkSys	USB100TX	1.1	x
LinkSys	USB200M	2.0	x
LinkSys	USB300M	2.0		x
NetGear	FA120	2.0	x
SMC	2208USB/ETH	1.1	x
SMC	2209USB/ETH	2.0		x
TRENDnet	TU2 ETG	2.0		x

The first driver that worked for me was a Pegasus driver for Mac OS X 10.3 (Panther) developed by Daniel Sumorok. Since then I've been collaborating with Daniel to help make more drivers available. We have ported his original Pegasus driver to work on Mac OS X 10.4 (Tiger or later), and developed a USB 2.0 AX8817x driver. All are open source released under a GPL license.

You can download them from here:

Description	File	Size	OS	Comments
Pegusus USB 1.1	USBPegasusEthernet 1.0.9	196K	10.3-10.5	Universal Binary
AX8817x USB 2.0	USBAx8817x 1.0.3b11	254K	10.3-10.5	Universal Binary
AX8817x USB 2.0	USBAx8817x 1.0.3b14	315K	10.5-10.6	Snow Leopard 64-bit Compatible

Each disk image includes an installer for Panther or 10.4_or_later, and a 'src' folder containing the corresponding xCode projects.

I have tested the Pegusus driver on a Belkin F5D5050 and the Ax8817x driver on a LinkSys USB200M. I am using the USB200M daily for Internet connectivity on an Intel Core Duo running Leopard.

I found a Belkin F5D5050 USB adaptor at Buy.com for $24.30 on 3/10/2005.

I picked up a LinkSys Compact USB 2.0 Network Adaptor (USB200M) at Staples for $29.98 on 3/19/2005 .

As of 2009, the Apple USB Ethernet adaptor is probably the best choice for most Mac users. It is competively priced and offers the most hassle free driver support.

AX8817x devices are fully backward compatible with USB 1.1 host ports and are reasonably priced, so are probably the best option at this time. Pegasus based devices seem to be getting harder to find. Some USB 1.1 devices use the Realtek 8150 or Davicom DM9601 which is not supported by these drivers.

With the announcement of the MacBook Air, Apple began shipping their own USB-to-Ethernet adaptor and driver (AppleUSBEthernet).I understand Apple's USB-to-Ethernet adaptor should work on other Macs running Leopard 10.5.2 or later (Daniel Sumorok has verified this). It can also be used on systems running Mac OS X 10.3.9 or later by installing our latest USBAx8817x driver. Apple's driver is not designed to support 3rd party USB-to-Ethernet adaptors or prevoius OS versions. We have modified our own driver to take precedence over Apple's driver when it is installed, and recognize the Apple USB Ethernet Adaptor.

USBAx8817x 1.0.3b14 improved compatibility with Gigabit Ethernet adaptors.
USBAx8817x 1.0.3b13 enabled Ethernet flow control.
USBAx8817x 1.0.3b12 includes a 32/64-bit Universal Binary (for 10.5 or later).
USBPegasusEthernet 1.0.9 updated to support SMC2208/ETH (ADM8513).
USBAx8817x 1.0.3b11 tuned to improve performance with some adaptors.
USBAx8817x 1.0.3b10 recognize Apple's USB-to-Ethernet Adaptor.
USBAx8817x 1.0.3b9 increases the 'probe score' returned for AX88772 devices to supercede AppleUSBEthernet.
The Tiger version was renamed to '10.4_or_later' and installs a Universal Binary that has been tested on Leopard (Mac OS X 10.5).
USBAx8817x 1.0.3b8 removes 'expected NULL' warning messages that appear in the System.log under Leopard.
USBAx8817x 1.0.3b6 and later support the new Ax88772-based DUB-E100, Airlink 101, and Belkin Gigabit USB Ethernet adaptors.
USBPegasusEthernet 1.0.8 updates the project to build properly on Leopard and supports the NetGear FA101.

Installation

Download and mount the appropriate driver disk image listed above, run the corresponding installer for Panther or 10.4_or_later, and then restart your system as suggested. The Installer will ask you to authenticate so it can place the corresponding driver in '/System/Library/Extensions/' with the correct file permisions to load as a kernel extension.

Next, plug-in your Ethernet adaptor with a live Ethernet cable attached. When you open the Network Preferences panel, it should inform you that a new port has been detected and ask if you want to enable it. Enable the new port and apply your network settings. On Leopard, the message indicating a new port has been detected may not appear, but you still need to Apply your network settings to enable the attached device for the first time.

Each driver is pre-configured to recognize a handfull of common devices. If your device does not appear to be recognized by the driver, you might have to add it to the Info.plist file, which is located inside the USBPegasusEthernet.kext or USBAx8817x.kext directory. You can use the System Profiler or USBProber tool to find the corresponding Product ID and Vendor ID.

To uninstall the driver, make sure any USB adaptors are disconnected, and then drag the corresponding driver in /System/Library/Extensions/ USBPegaususEthernet.kext or USBAx8817x.kext to the trash. You may need to authenticate that you have administrator privileges.

USB 1.1 Performance

The Pegasus chipset provides a USB 1.1 compatible implementation which could be a concern for some users. USB 1.1 runs at 1.5 Mbps (low speed) or 12 Mbps (full speed). For best performance, it's important to isolate any low speed devices on a separate bus. Mice and keyboards often run at low speed.

Using the Link Rate tool in IPNetMonitorX, I measured the link rate to another device on my LAN as 6 Mbps. The built-in Ethernet on my 12' PBG4 reported 44 Mpbs. When I measured the link rate to the next hop router through my cable modem, it reported 1 mbps. It didn't make any difference whether I used Ethernet built-in or the USB-To-Ethernet adaptor. Finally, I downloaded a 2.2 MB file to compare the throughput using the Monitor tool.

Both downloads took 5 seconds, but Ethernet built-in reached a peak rate of 589 KBps versus 579 kBps. Repeating the experiment several times produced similar results. Ethernet built-in might be 1-2% faster, but performance was clearly limited by the speed of my cable modem (Your Mileage May Vary).

USB 2.0 Performance

The AX8817x chip set provides a USB 2.0 compatible implementation which runs at up to 480 Mbps (high speed), so it should be possible to keep up with 100 Mbps fast ethernet as long as there are no other slower devices on the same bus. To test this I copied a 64.8 MB music file to my PBG4 laptop connected through a LinkSys USB200M Ethernet Adaptor (en3) and compared this to the same file transfer using Built-in Ethernet (en0).

Both transfers reached 10 MBps (80-90 Mbps) and took about 10 seconds. I repeated the test in the other direction.

While the USB-To-Ethernet adaptor was slightly slower, at 80 Mbps there was little noticeable difference. Files moved quickly from one system to another via 100 Mbps fast Ethernet. Copying the same file using AirPort wireless took 50-90 seconds.

Stability

While other USB-To-Ethernet drivers are reported to be buggy, I haven't encountered any stability problems to date. The adaptor turns off when the computer goes to sleep and comes back on when the computer awakes. It does not support 'Wake On LAN' at this time.

Wrap Up

This USB-To-Ethernet Adaptor combination could be an attractive solution for a Mac Mini, or old iBook used as an Internet gateway or server. I'm particularly fond of using old laptops as servers since they are compact, quiet, use little energy, and include their own battery backup.

I hope you find this information useful and welcome your comments and experience.

- Peter Sichel
Sustainable Softworks
psichel 'at' sustworks 'dot' com

Last updated 18-Mar-2011.

Many fellow Mac enthusiasts have written to thank us for these drivers (you're welcome), and some have even asked if they could contribute something to support our on going efforts. While our intent is to make these drivers freely available, we do have expenses and welcome any support. Thanks!

Lq 580 driver for mac. Downloads the latest official version of the drivers for the Hardware and installs them correctly.

Davicom Dm9601 Driver For Macbook Pro

Download the most recent Davicom DM9601 USB To Quick Ethernet, Adapter driver for your personal computer's working program. Generic snes super nintendo controller usb connection for mac. All downloads accessible on this web site have happen to be scanned by the latest anti-virus software and are usually guaranteed to end up being disease and malware-free. Browse the list below to discover the driver that meets your requirements. To observe more matches, make use of our custom made search engine to. Tech Tip: If you are having difficulty deciding which is usually the correct driver, try out the. It will be a software tool that will find the correct driver for you - immediately. DriverGuide keeps an comprehensive store of Home windows drivers available for free of charge download.

We utilize a team from around the globe. They add hundreds of fresh drivers to our site every day time. Having trouble finding the right driver? Attempt the, or yóu can and wé will find it for you. General Rating: (9 ratings, 9 testimonials) 2,034 Downloads Submitted Jul 28, 2008 by XiQu3sT (DG Member): ' DM9601 10/100Mbps USB 1.1 Quick Ethernet Single Chip NIC Control. LINUX >FOR LlNUX - WINCE30 >FOR Get CE 3.0 - WIN98SE >FOR Get 98sy DRIVER Sixth is v1.80 - WINME >FOR WIN Me personally WHQL Car owner V1.60 - WIN2K >FOR Gain 2000 WHQL Motorist V2.10 - WINXP >FOR.'

Davicom systems are the ideal solution for monitoring the transportation industry's telecommunications infrastructure. They quickly identify weak links and failures to allow the right people with the right parts to be efficiently dispatched for repairs and maintenance.

Supply: Manufacturer Website (Formal Download) Gadget Kind: Additional Devices Supported Operating-system: Get Vista, Get XP Home, Get XP Pro File Version: Version 1. Launch Time: 2002-03-12 Document Dimension: 19.3 KB File Name. General Rating: (22 rankings, 22 reviews) 3,864 Downloads Posted Sep 26, 2007 by ELIJAH Age. (DG Associate): ' Gadget is definitely a USB tó LAN adapter. Car owner functions for Vista and XP (X86). On MS Vista, it reviews the Hardware Device Information (4rmeters device supervisor) as USB/VID0A46PID9601 - while the gadget reports business as KangHui Technology Company. I Tested on Acer Aspire 5610 Laptop.

Jp1081b Driver For Mac Os

Resource: Producer Web site (Formal Download) Gadget Type: Other Gadgets Supported Operating-system: Get XP Home, Gain XP Pro File Version: Edition 1. Discharge Time: 2002-03-12 Document Dimension: 19.3 KB File Name.

• Install DAVICOM DM9601 USB To Fast Ethernet Adapter(KMDF) driver for Windows 10 x64, or download DriverPack Solution software for automatic driver installation and update.
• Dm9601 usb verify every device on your system for driver updates B. Disconnect the device from your computer. How to Install Drivers After you dm9601 usb found dk9601 right Davicom device driver, follow these simple instructions to install it.

General Rating: (18 ratings, 20 testimonials) 3,653 Downloads Posted December 7, 2006 by Dug Stokes (DG Member): ' Tweaked edition of DM9601XPLogoDriver587532' Resource: Producer Website (Public Download) Device Type: BIOS / Motherboard Supported Operating-system: All Gain 2000 File Version: Edition 2. Discharge Day: 2002-03-15 Document Dimension: 20.9 KB Document Title: 19 Downloads Submitted Jan 25, 2005 by BalajiA (DG Personnel Associate): ' WIN2E WHQL Logo design driver' Supply: Manufacturer Web site (Established Download) Device Kind: Some other Gadgets Supported OS: Win ME Document Version: Edition 1. Launch Day: 2002-03-19 File Size: 20.7 KB Document Title: 46 Downloads Submitted Sep 8, 2004 by Andrews (DG Staff members Associate): ' WINME WHQL Logo driver' Source: Manufacturer Web site (Official Download) Gadget Kind: BIOS / Motherboard Supported Operating-system: Win XP Home, Get XP Pro File Edition: Edition 1. Launch Day: 2002-03-12 File Dimension: 19.3 KB Document Name: 41 Downloads Submitted Jan 25, 2005 by BalajiA (DG Personnel Associate): ' XP WHQL Logo drivér with HCT10.0 QFE5' Gadget Kind: Network Products Supported Operating-system: Win XP Home, Win XP Professional, Win 2000 Workstation, Get 2000 Machine, Gain 98SE, Get 98, Win 95 File Edition: Edition 1.0 Document Size: 139.9 KB Document Name.

USBCDCEthernet This deploys a driver fór the USB-Ethérnet adapter based on Davicom DM9601 on MacOS X, such as JP1081B/Zero:9700 Why does this task can be found? The formal driver óf JP1081B/No:9700 doesn't possess a long lasting MAC deal with. The Mac pc address is definitely randomly described. Also, it's difficult to establish an IP deal with from Mac pc address. How do I set up it?. Download the resource right here from Github and compile it with XCode.

Copy USBCDCEthernet.kext in /System/Library/Extensions with 'sudo' command word. Thanks a lot and Acknowledgements Car owner Davicom from Haiku task. Centered on USBCDCEthernet illustration from IOUSBFamily-560.4.2. License This program code is licensed under Apple Public Source License.

Jp1081b Driver Mac Download

Discover LICENSE for more details.